Click here to pick a palette color by name. Mask paint tool Click on a background area to create or revert an antialiased mask. Shrink Select tool: Equivalent to the Marquee tool, with Shrink to Fit selected. Paint behind tool: Equivalent to the Paint Bucket tool and the Darkest Color/Minimum mode, with at least 1 pixel expansion. Click on the paint-fill point. Line painting tool: Equivalent to Free Draw tool and Lightest Color/Maximum mode. Mouse down and draw. Click or drag to establish a pass-through point for the curve Click here to execute the Auto-Paint list. Click here to select Edit Paint. Click on a Paint Step marker to edit it. Click here to select Move Paint. Drag Paint Step markers to new positions. Click here to select Delete Paint. Click on a Paint Step marker to delete the marker from the list. Click here to invert the luminosity of the selected area. Click here to increase the saturation of the selected area. Click here to decrease the saturation of the selected area. Click here to select Color name. Click on a colored area & drag to where the color's name is to appear. Click to expand or contract the select area. Option-click to edit the expansion. Click to select Centered Filled Regular Polygon. Option-click to edit. This tool draws a regular polygon around the mouse down point, with any # of sides, & fills it. Click to select Centered Regular Polygon. Option-click to edit. This tool draws a regular polygon around the mouse down point, with any # of sides. Click to select Perfect Water. This tool uses the current pen to blur the image. Option constrains movement to an axis. Click to select Water. Option-click to edit. This tool uses the current pen to blur the image. Option constrains movement to an axis. Click here to select Hand. This tool moves the image by scrolling it. Click here to select Select Bucket. This tool fills an area with selection (like the paintbucket), regardless of the paint mode. Click here to select Poligonal Selection. This tool fills an area with selection (like the filled polygon), regardless of the paint mode. Click here to select Load Brush. This tool takes a non-white area from a document and makes it the special brush. It reverts after use. Click here to select Move Point. This tool allows you to move an on-/off-point by clicking on it & dragging. Option constrains movement to an axis. Click here to select Remove Point. This tool allows you to remove an on-/off-point by clicking on it. Click here to select Add Off-Point. This tool allows you to add a control point to a curve, which the spline must smoothly approach, but not neccesarily touch. Mouse down on a line segment & drag the point to the desired position. Click here to select Add On-Point. This tool allows you to add a control point to a curve through which the line will pass, & at which the line may turn. Mouse down on a line segment & drag the point to the desired position. Click here to select Spline Start. This tool allows you to start a spline, by placing a line, or to place a new line into a spline. Click here to select Blob. This tool allows you to draw a closed free shape. Click here to select Pencil. This tool is a free draw tool with a 1x1 pen in Acrylic mode. Option constrains movement to an axis. Click here to select PF6. Depending on usage, this may be unused, immediate action, or a draw tool, & double-clicks may have meaning. Click here to select PF5. Depending on usage, this may be unused, immediate action, or a draw tool, & double-clicks may have meaning. Click here to select PF4. Depending on usage, this may be unused, immediate action, or a draw tool, & double-clicks may have meaning. Click here to select PF3. Depending on usage, this may be unused, immediate action, or a draw tool, & double-clicks may have meaning. Click here to select PF2. Depending on usage, this may be unused, immediate action, or a draw tool, & double-clicks may have meaning. Click here to select PF1. Depending on usage, this may be unused, immediate action, or a draw tool, & double-clicks may have meaning. Click here to select Filled Blob. This tool allows you to draw a closed free shape, which is filled. Click here to select Store. This tool allows you to store the current color/pattern into the Palette window. Click here to bring up the color wheel & to choose a color not on the palette. If there are <24 color bits, the color may be dithered. Click here to create an HSV color spread in the palette between 2 existing palette cells. Click here to create an RGB color spread in the palette between 2 existing palette cells. Click here to select Airbrush. Option-click to edit. This tool gives pressure-sensative soft-edge free drawing. Option constrains movement to an axis. Click here to pixelize the selected area/document. Option-click to edit pixelization. Click here to select Smudge. Option-click to edit pixelization. This tool uses the current pen shape & size and draw direction to smudge the document. Option constrains movement to an axis. Click here to blur the selected area/document. Option-click to edit blur/pixelization level. Click here to select Registration point. Click in the document to establish a registration point, used in animation as a placement point & center of magnification & rotation. Click here to select Filled polygon. Click in the document to start a polygon. Move to another point & click again to establish another vertex. Click on the last point or option-click to end & fill the polygon. Click here to select Polygon. Click in the document to start a polygon. Move to another point & click again to establish another vertex. Click on the last point or option-click to end. Click here to select Horizontal tilt. Click & drag in the document to tilt the selected area/document left & right. Click here to select Tilt. Click & drag in the document to tilt the selected area/document up & down. Click here to extrude/relight the selected area/document. Option-click to edit lighting. Click here to select Twist. This tool twists the selected area/document about a vertical center-line. Click in the document to establish the 180° of twist position. Click here to select horizontal bend. This tool bends the selected area/document. Mouse down in the document & drag to establish the shape and extent of the bend. Click here to select vertical bend. This tool bends the selected area/document. Mouse down in the document & drag to establish the shape and extent of the bend. Click here to flip the selected area or document horizontally. Click here to flip the selected area or document vertically. Click here to select Rotate by degrees. This tool rotates the selected area/document by some # of degrees. Mouse down & drag out the rotation desired. Rotation is displayed as a wedge from the 12:00 position & in the Status window. Click here to select Rotate. This tool rotates the selected area/document. Mouse down & drag out the rotation desired. Rotation is displayed as a wedge from the 12:00 position & in the Status window. Click here to select Large cube stamp. This tool copies the selected area/document onto 1-3 sides of a cube, adding white area if the area is not square. Mouse down & drag in the document to establish the cube angle. Click here to select Cube stamp. This tool copies the selected area/document onto 1-3 sides of a cube. The area is clipped if not square. Mouse down & drag in the document to establish the cube angle. Click here to select Large cube fold. This tool folds the selected area/document onto 1-3 sides of a cube, adding white area if the area is not square. Mouse down & drag in the document to establish the cube angle. Click here to select Cube fold. This tool folds the selected area/document onto 1-3 sides of a cube. The area is clipped if not square. Mouse down & drag in the document to establish the cube angle. Click here to wrap the selected area/document onto a best-fit ellipsoid. Option-click to edit lighting. Click here to select User-defined ellipsoid. Option-click to edit lighting. This tool wraps the selected area/document onto an ellipsoid. To define the ellipsoid, mouse down at the center & drag to establish a bounding box's corner. Click here to wrap the selected area or document onto a best-fit cone. Option-click to edit lighting. Click here to select User-defined cone. Option-click to edit lighting. This tool wraps the selected area/document onto a cone. To define the cone, mouse down at the vertex & drag to establish a bounding box's corner. Click here to wrap the selected area or document onto a best-fit cilendar. Option-click to edit lighting. Click here to select User-defined cilendar. Option-click to edit lighting. This tool wraps the selected area/document onto a cilendar. To define the cilendar, mouse down at one aparrent corner & drag to establish another. Click here to wrap the selected area/document onto a best-fit sphere. Option-click to edit lighting. Click here to select User-defined sphere. Option-click to edit lighting. This tool wraps the selected area/document onto a sphere. To define the sphere, mouse down at the center & drag to establish a bounding box's corner. Click here to select Syringe. Click in the document to select the current color. Drag to establish a range of "from" colors for the RGB & HSV block change effects. Click here to select Magic eraser. Option-click = Undo. This tool erases items in the document by replacing them with image from the undo buffer. Option constrains movement to an axis. Click here to select Eraser. Option-click = Clear all. This tool erases items in the document by replacing them with white. Option constrains movement to an axis. Click here to select Magnification. Option-click to edit. Click in the document to open a window magnified about any point. Option reverses the magnification. Click here to select Protect. Click in the document to protect area of a single color. Click here to fill the selected area with the current color/pattern. Click here to select Bounded fill. Click in the document to fill an area of with the current color. The fill proceeds up to the bounding color. Click in the palette to make the current color the bounding color, & to select a new fill color. Click here to select Paintbucket. Click in the document to fill an area of a single color with the current color/pattern. Click here to select Resize. Click on a part of the selected area or document & drag it to a new position. The rest of the area will resize with it, about the area's center. Aspect will be maintained. Click here to select Stretch. Click on a part of the selected area or document & drag it to a new position. The rest of the area will resize with it, about the area's center. The resizing will occur in only 1 dimension. Click here to select Copy. Click in the selected area & drag a copy of it to a new position. Option constrains movement to an axis. Click here to select Move. Click in the selected area & drag it to a new position. Option constrains movement to an axis. Command copies the area. Click here to select the entire document. Click here to select Lasso. Click & drag within the document to establish a select area. Shift adds to the select area. Click here to select Marquee. Click & drag within the document to establish a rectangular select area. Shift adds to the select area. Click here to select Text. Click in the document to start a text edit. Click within a text edit to move the cursor. Click & drag to establish an edit range. Click here to select Centered filled rounded square. Option-click to edit corner curvature. Click in the document to establish a center point. Drag to establish a corner. Click here to select Centered rounded square tool. Option-click to edit corner curvature. Click in the document to establish a center point. Drag to establish a corner. Command fills the shape. Click here to select Centered filled rounded rectangle. Option-click to edit corner curvature. Click in the document to establish a center point. Drag to establish a corner. Option constrains the shape to a square. Click here to select Centered rounded rectangle. Option-click to edit corner curvature. Click in the document to establish a center point. Drag to establish a corner. Option constrains the shape to a square. Click here to select Filled rounded square. Option-click to edit corner curvature. Click in the document to establish a corner. Drag to establish another corner. Shift draws the shape from the center. Click here to select Rounded square tool. Option-click to edit corner curvature. Click in the document to establish a corner. Drag to establish another corner. Command fills the shape. Click here to select Filled rounded rectangle. Option-click to edit corner curvature. Click in the document to establish a corner. Drag to establish another corner. Option constrains the shape to a square. Click here to select Rounded rectangle. Option-click to edit corner curvature. Click in the document to establish a corner. Drag to establish another corner. Option constains the shape to a square. Click here to select Centered filled square. Click in the document to establish a center point. Drag to establish a corner. Click here to select Centered square. Click in the document to establish a center point. Drag to establish a corner. Command fills the shape. Click here to select Centered filled rectangle. Click in the document to establish a center point. Drag to establish a corner. Option constrains the shape to a square. Click here to select Centered rectangle. Click in the document to establish a center point. Drag to establish a corner. Option constrains the shape to a square. Command fills the shape. Click here to select Filled square. Click in the document to establish a corner. Drag to establish another corner. Shift draws the shape from the center. Click here to select Square. Click in the document to establish a corner. Drag to establish another corner. Command fills the shape. Shift draws the shape from the center. Click here to select Filled rectangle. Click in the document to establish a corner. Drag to establish another corner. Option constrains the shape to a square. Shift draws the shape from the center. Click here to select Rectangle. Click in the document to establish a corner. Drag to establish another corner. Option constrains the shape to a square. Command fills the shape. Click here to select Centered filled circle. Click in the document to establish a center point. Drag to establish a corner of the circle's bounding box. Click here to select Centered circle. Click in the document to establish a center point. Drag to establish a corner of the circle's bounding box. Command fills the shape. Click here to select Centered filled oval. Click in the document to establish a center point. Drag to establish a corner of the oval's bounding box. Option constrains the shape to a circle. Click here to select Centered oval. Click in the document to establish a center point. Drag to establish a corner of the oval's bounding box. Option constrains the shape to a circle. Command fills the shape. Click here to select Filled circle. Click in the document to establish a corner of the circle's bounding box. Drag to establish another corner of the bounding box. Shift causes drawing to be from the center. Click here to select Circle. Click in the document to establish a corner of the circle's bounding box. Drag to establish another corner of the bounding box. Command fills the circle. Click here to select Filled oval. Click in the document to establish a corner of the oval's bounding box. Drag to establish another corner of the bounding box. Option constrains movement to an axis. Click here to select Oval. Click in the document to establish a corner of the oval's bounding box. Drag to establish another corner of the bounding box. Option constrains the shape to a circle. Command fills the shape. Click here to select 3-point arc. Click in the document to place an end point of the arc. Drag to the other end point & release the mouse. Click or drag to establish a pass-through point for the curve. Click here to select Constrained arc. Click in the document to establish an end point. Drag & release to establish another end point. An arc will form which is a quadrant of a circle. Click here to select Arc. Click in the document to establish an end point. Drag & release to establish another end point. An arc will form which is a quadrant of a oval. Option will constrain the arc to a circular quadrant. Click here to select Line. Click in the document & drag to establish a line. Option will constrain movement to an axis. Click here to select Dotted constrained free draw. Use to draw. Movement will be constrained to an axis. Pen images are stamped at a distance controlled in the pen edit. Click here to select Constrained free draw. Use to draw. Movement will be constrained to an axis. Click here to select Dotted free draw. Use to draw. Pen images are stamped at a distance controlled in the pen edit. Option will constrain movement to an axis. Click here to select Free draw. Use to draw. Option will constrain movement to an axis.